You are here:
Jenaer Strasse 96
Konigslutter Am Elm, NI 38154
0173 11 24 18 http://www.mobypicture.com/user/psylofashion2/view/20259552
Hint: then you may need to make sure it is in all the way if your machine shows a message that the hoop is not the correct size for the design when it clearly is small enough to fit in the hoop. When you have not started a design yet, turn the power of the machine off, take from the hoop, switch on the ability, then place the hoop on. This should correct it.
I prefer the multi-hoop capability, but wish it was better to make. This and also the bigger hoop were the reasons I sold my CE250 and bought that one alternatively. The hoop that is large a location of approximately 6.5 by 10.5 ins. This has multi-hooping ability, that we never have tried yet, but can have four large hoops in a square. The qualities page says 18.5 by 11 inches. The hoop that is small an embroidery area of approximately 4 by 4 inches. In regards of just how many stitches a design has, the biggest embroidery design that I used on this machine had over 60,000 stitches with no issue.
To understand about the best embroidery machine and applique embroidery, visit all of our page
best sewing embroidery machines
With embroidery sewing machines you connect an embroidery hoop to help keep the fabric taut, this might be important if you're to make a result that is neat. The hoop continues to be fixed which is the machine that moves around to create the look.
This is an thing that is absolutely fascinating view. You merely have to intervene when it comes to
the thread for a color that is new.
When you're embroidering you need what is called a stablizer, it is a unique little bit of fabric which stiffens the top material so the embroidery can be accomplished perfectly. When doing normal embroidery this stablizer can be used underneath the design, but when you are embroidering on something that has a nap, say for instance terry towels then a stablizer is used on the top to prevent the needle getting snagged into the textile.
There are various kinds of stablizer, some are water dissolvable and also this means when you wash the completed article the excess stablizer just dissolves away. Usually the one that reacts to warm simply turns to ash each time a iron that is hot applied.
No records to display.
Compose New Message
COSL (Singapore) BASE
3 Benoi Road
Phone: +65 6513-6780
Copyright 2017 - COSL Singapore Limited